robbie_hendry Anyone tell me how to fit a dbilas masterflow. I am getting confused on were to attach the wires in the inlet pipe from the throttle body to the airbox as these no holes on the pipe I got with the master flow. As set up as below
evocarlos looks quite easy all the info is on the dbilas product page 🙂 http://www.dbilas-shop.com/Products/FlowMasterKit/Opel-Vauxhall/Astra/Astra-G/FlowMaster-Kit-Opel-Vauxhall-Astra-G-Z22SE::7.html kit rear bracket front braket fitted with the standard intake pipe
Sjdickso As above but in your photos it doesn't look as if the previous owner tapped into the intake pipe for the air intake sensor or for the FPR pipe.
vx-chris Sjdickso said: As above but in your photos it doesn't look as if the previous owner tapped into the intake pipe for the air intake sensor or for the FPR pipe. Its near the cam breather pipe 😉 I only seen it because I zoomed in on the picture
Sjdickso peng12 said: Its near the cam breather pipe 😉 I only seen it because I zoomed in on the picture Well spotted.
