Sjdickso Can anyone confirm how to remove the interior light fitment from the roof lining and can you just swap them over or do they need to be coded. Or anything as they are linked with the alarm. Found my rattle, it's coming from the fitment.
evocarlos theres 2 parts the plastic cover and the bulb part the cover just clips off not sure on the rear bit heres a pic
jwalker The rear just pulls off, if it's a bit tight on the left it's because the plug is in the way. The front unclips and the rear should come out
evocarlos i think there just the glass break sensors so should be a swap over theres not in op-com to set it
Sjdickso Was very easy to swap. One hard pull and came out. New one was plug in sorted! No rattles from that now 🙂
