Fao ,the root of all z22se knowledge..aka vocky

Daz

Have you come across any probs with the cruise control on the vectra m8,mine keeps puting the eml light on and kills the c/c.
Plugged it into our scanner in work and it shows up as bpp switch,so changed that and it still does it..
Not sure where to go next tbh..wiring wot i can see looks ok.

vocky

might be a dodgy wire on the stalk notsure.gif

I've had to replace the wires on a cc stalk because they shorted out :shock:

very easy to do, the wires run inside a channel and the cover just unclips

there's not much to the cc circuit, just the clutch switch, brake switch and stalk + the engine ecu itself

Daz

I'll have alooky at the stalk 2moz,
The code says brake peda; switch circuit one,and thats,one wire goes to the ecu and one to the c/c switch,
Knowing my luck its prob the ecu.
thanks for the advice anyhows m8ty..

Daz

Well i think i cured the fault,it must have been the abs ring that was split causing it to throw up the fault,since changing the ring friday it hasnt done it,