ProDrive SRi-T Rear Splitter & Parking Sensors
At long, long last I finally got around to fitting the ProDrive SRi-T Rear Spitter I bought from Turbo Chris a good while back. I also changed the rear bumper as mine had slight damage, and whilst I was at it I thought I may aswell fit parking sensors (although they won't be wired up until the weekend).
The first job was to colour code the parking sensors to Star Silver 3 (Z157).
Before...
After...
The car needed a clean first...
All the bumper fixings were removed, well all but the last. I was thwarted by a rounded torx screw (pic taken two days later when I resumed...).
It was then I noticed the black clouds looming so put all the screws back and saved it for two days later...
The problem with the rounded screw was solved by a dremel and making a slot 😉...
Rear lights removed for access...
And bumper off...
You can just make out the line with M250 and M500 arrowed. Whether these are parking sensor marks or not, I used them...
Prefect...
The middle two sensors (2 & 3) needed the foam block hollowing to allow their fitment.
Bumper with parking sensors fitted and rear lights refitted. Next was the long part of the ProDrive SRi-T Rear Splitter (and the stage I ran out of time, unfortunately)...
A new day and an overwhelming urge to complete the job...
The exhaust is slightly skewed, which I plan to investigate soon. I think it's the flange alignment so may not be an easy fix...
