juan_carlos hi guys, A few years ago I was out of here ... Today I bought an Astra bertone z22se faulty motor, I thought it was chain, opening deck I found this. I need advice from you
flatbeat Your chain may have jumped a tooth or 2 Looking at the pic you will need new fingers and check the timing is right Then see if it runs if not you may have bent valves
juan_carlos wich would it be the best way to try to repai it ? is there any way to find a guide ? thank you very much.
juan_carlos Today I have another look and I got a picture, for you to see if chain tension is good. Thinking of setting up a new tensioner and fingers and do a test before the change leader? Reside Spain..
Daz Before you do anything else, remove both camshafts and measure the heights of the valves. as i can say 99.9% ure gonna have bent valves, as the rockers wudnt have broke for any other reason...
juan_carlos Yesterday I started to remove cylinder head and I ran outside to get chain guide plug that inside a screw loose? sorry, translated by google
cavaddict Looks like the top front bolt has sheared and fallen down inside the engine. This will mean taking the side cover off.
