after the rebuild the engine will not start but pops after few trys. from the looks of its not getting a spark but everything was fine before rebuild with the ecu and coilpack, but looking a the ecu one of the pins has melted in the holes on the left ecu plug and the top right pin, we taken it out and put it back into the ecu and now its shorter then the others.
any help on this problem, i was thinking getting a second hand ecu but i dont know if it'll work still with that and what casued it to melt one pin into it :/.
if i'm off work tomorrow i'll put up photos
any help would be great
thanks
jnaisby
