recaro`s

herb-16v

my recaro`s are not wired in and was looking round the net to find out how to wire them in and some people are saying wire them into the Sig lighter? dose any 1 on here know how i would wire them in? notsure.gif

vocky

I guess they are vectra gsi seats, if so they are quite easy to wire up

herb-16v

vocky said:
I guess they are vectra gsi seats, if so they are quite easy to wire up

yer vectra, how do i wire them up lol?

Daz

Something rings a bell with bridging some terminals in the heated seat switch housings..... notsure.gif

JohnnyN

How have you by-passed the seat airbags?

herb-16v

Daz said:
Something rings a bell with bridging some terminals in the heated seat switch housings..... notsure.gif

yer thats some think else i don't get i seen that on the net about bridging it but how do i connect them under the seat when there is no wires for heated seats under seat but is to the dash

JohnnyN said:
How have you by-passed the seat airbags?

ha ha i forgot i did this till you said lol i put a wire from abs i think to the air bag light so go off at same time :think: till i found out how to by-pass it

vocky

I fitted a two airbag ecu to my old sri150 when I fitted the gsi seats :thumbup:

herb-16v

vocky said:
I fitted a two airbag ecu to my old sri150 when I fitted the gsi seats :thumbup:

good thinking 😃 how do i wire them up to move up and down tho? notsure.gif

vocky

use the heated seat switches for the power, so buy a couple of switches from ebay, then figure out which cable it is under the seat (I will have a look in the vectra manual later), then use those to power the gsi seats (but I can't remember the wiring colours)

herb-16v

thanks very much vocky its all sorted and working thanks very much 😃 :thumbup: