vectra front seats

andy24

hi all
am trying the find the bolts that the haynes manual said there was to hold my seats in.
when looking @ it i cant get the sill trim off till i take the seat out thinking the trim may covering the bolt heads.
ive had the seat back n forward but deffo no torx bolts there from what the manual says or am i totally stupid?
vectra sri 150 petrol (51 plate)
thanks

Matt

Push the seat foward, prise off the plastic cover from the side of the seat and undo the bolt that holds the seat belt to the seat frame.

Behind the seat on the runners you will see another bolt, undo these (One on each runner) and pull the seat back and up and it will just slide out.

andy24

ive taken the seat belt off the seat a while back but wasnt under plastic.
will have anoher look tomorrow
thanks

jwalker

Have a look at the ends of the runners behind the seats, there's one torx bolt on each runner, really hard to miss

Also watch for the airbag plug under the seat and don't turn on the ignition with the seats disconnected or you'll be stuck with the airbag light

andy24

thanks will have a look tomorrow.
also this is a car i bought to strip so i can have the engine for my other vectra so not a problem with ignition going on but thanx cos am a bit rusty @ all this lol