Intake pipe HELP PLEASE!!!

Linea_rossa_2_2

Hi Guys

Need a little help for you all.

I bought a custom intake pipe like the ones a member off here was selling, its arrived but I'm a little unsure where a certain pipe goes..... please see arrow below:

The intake pipe I have has holes for the air temp sensor and breather pipe but cant see where the tube I have high lighted goes

What is it and how do I attach it to the pipe?

Thanks guys

MikeS

if there isnt a hole for it on the bend above the throttle body then either you make one or plug it into a spare connection on the side of the inlet manifold where the brake servo connection is

Linea_rossa_2_2

So I make a hole in the silicone bend and just shove it in?

What does it do?

pottsey

dont make a hole in it ,your better off relocating it onto the spare take off on the side of the inlet manifold as mike says

pottsey

the pipe with red on is the one that would go into the inlet pipe,where you see the little blue dot is where you want to relocate it to .
the pipe with the white on is the one that comes from the rear of the engine if you find where that goes to you will find the spare nipple to put the other pipe onto ,hope this makes sense

this is known as the fpr mod ,do a search there is loads of info on it

Linea_rossa_2_2

Ah ok Pottsey

So I remove the pipe I have arrowed in the first pic and relocate it to the small outlet just by the inlet manifold as in your pic?

Does it just stay in or do you have to "atttach" it so it doesn't come loose?

pottsey

as long as you still have the rubber bit that was on the pipe that attachs to the the original nipple on the original inlet pipe ,it will be fine .on the spare take off there will be a rubber cover on it just pull that off and attach the pipe

Linea_rossa_2_2

Awesome cheeers guys......

Will take a look and get back to you

Maverick

Why is there a huge hole in the top of your airbox?

JohnnyN

Its a window to see the panel filter.

BIGWAF

Has anyone got the rubber bit at all please i've managed to lose my one? :-(

Mahonski

Sorry to jump in on your thread mate but who sells these air box to tb air pipes?

exmantaa

Just seeing this, but take care that that small tube (fuel regulator connection to atmosferic pressure) is normally connected somewhere BEFORE the throttlebody. (on a normal NA Z22SE.)
If you connect this onto the manifold (so after the TB), you will screw up your fuel pressure/mixture....