18/03/09
Very annoyingly, despite my best efforts at sealing the lights the rear ones were still steaming up :angry: Though the fronts have been fine
So I took them off a couple of weeks ago, and knowing that it couldn't be the fitting of the lens covers came to the conclusion it could only be due to the foam material used to hold the light away from the bodywork being sodden with water at the bottom corner on the back of the light, perfectly in line with the lowest of the light protrusions into the light casing.
It turns out the small lenses are only push fit, so not water tight (proven by putting a drop of water into the back of it and watching it run through into the light :rolleyes🙂 so I decided to try sealing the rear of one of the small lense protrusions to see if that worked
Low and behold it seems to have fixed all of my light leaking problems (whilst the offside unsealed one was still getting worse)
So today I finished the offside one too - it's not exactly an elegant solution, but what the heck, it works B)
Note I have left some air gaps through to the lenses on the two upper light protrusions, just in case they need to 'breathe' a bit 🙂
