Al_White Hi all, I have just about finished my stage 2 (charge cooler) s/c conversion. Car is cranking but no fuel is coming through injectors. Is the fuel pump meant to prime before the engine starts? Many thanks, Al, :cry:
vocky the fuelpump should prime before the engine starts have you checked the relays in the boot, the cut off button in the engine bay, the crank sensor and the fuses in the boot and under the windscreen by the wiper motor
Al_White I have checked the relays and fuses. Where is the cut off button and the crank sensor? Thanks for your help.
techieboy Al White said: Where is the cut off button and the crank sensor?. Basically below the expansion tank attached to the subframe. There's a small black rubber coated push button to reset the fuel pump. Circled in yellow at the bottom left here
Al_White I've sorted it now by puttin in a high flow fuel pump. Seemed the best way to go with the setup. Thx for the help AL 😃
