z22yh help needed

matty0785

right best give you the full story of whats happened so far

bought a 2.2yh singum few months ago eml light was on so cecked coded both lambda sensors were buggered so replaced no more eml light or codes now i have a new problem and i just cant understand why its happening

lots of blue smoke out exhaust inlet manafold full of gunge (black oiley gunge) and lots of it checked what breather hoses i can find and cleaned i just dont know how oil is getting into the inlet manafold

just to put into perspective its burning around 1 ltr of oil per 70 miles and its slowly but surely getting worse

any help much apreciated

ATOM_X

matty0785 said:
right best give you the full story of whats happened so far

bought a 2.2yh singum few months ago eml light was on so cecked coded both lambda sensors were buggered so replaced no more eml light or codes now i have a new problem and i just cant understand why its happening

lots of blue smoke out exhaust inlet manafold full of gunge (black oiley gunge) and lots of it checked what breather hoses i can find and cleaned i just dont know how oil is getting into the inlet manafold

just to put into perspective its burning around 1 ltr of oil per 70 miles and its slowly but surely getting worse

any help much apreciated

what does the feel like in terms of ordinary daily performance?

matty0785

some times its as normal drives fine some light smoke sometimes its realy down on power and smoking worse when its down on power i just cant understand how the oils getting there iv blanked of the breather and put clean cloth over it to see if it was throwing oil out cam cover breather and nothing much coming out just a few splatters on the rag

vocky

you need to fit a filter to the cam cover and blank off the inlet manifold end, then see if you get any oil in the inlet manifold

matty0785

i asume it would be ok to run a pipe from the cam cover to underneith the car to stop the smell of the vented air coming into the cab how hard is the inlet manifold to take of as i think i will need to get it off and steam clean the inside of it tbh

matty0785

im just hoping it isnt bore washed as i dont know how long it had been running with both lambdas fecked and before they were changed it was over fueling a lot so with a bit of luck bores and rings will be ok

ATOM_X

matty0785 said:
im just hoping it isnt bore washed as i dont know how long it had been running with both lambdas fecked and before they were changed it was over fueling a lot so with a bit of luck bores and rings will be ok

were are you based?

matty0785

im in central scotland mate