TPS errors

FLD

I've just broken down. Bah! Going well then splutter splutter, revs all over the shop and dies. Ended up being towed home 🙁 Get error code P1515 and P1516. Clear them out and now only get P1515 but get it consistently. This translates to a throttle position error but is this pedal end or throttle end?
Cheers

Matt

MikeS

most likely throttle body

u can pick one up 2nd hand for peanuts

i would check the wiring, make sure the TB isnt blocked up and do the ignition on test with the throttle position [ need 2 ppl]

take off intake pipe, put ignition on then pump the pedal and the tb flap should move accordingly

FLD

The throttle body is new so I'm guessing it'll be the wiring in the plug. I've had one broken wire to the throttle so it makes sense that the rest are suffering. I needed to know if it was the throttle or the pedal sensor that causes this error. Throttle it is then. I'll get to it with a whole new plug.

Thanks