airbag fault code help!!

kinglarry001

hooked car up to garage diagnostic thing, in the body section, had 2 faults:

-P001f (driver airbag squib circuit high res) - take this means dodgy connection or break in the wire somewhere. as on live data the reading for it was 6.50hm when the other airbags were 2.10/2.20hm.

-P002c (telltale signal low or circuit open)

dont kn ow if related, but also on the live data readouts, it said
"reset pretensioner devices after activation - fault"
"reset driver side airbag after activation - fault"
"reset passenger side airbag after activation - fault"

they have never deployed!!! i should have known lol

is it a case of getting a tech 2 to reset it or are the airbags fubar?

vocky

something sounds odd, my obd2 reader resets the airbag codes, so you don't need a tech2, just a better code reader

MikeS

my gendan interface resets traction control & ABS faults through the main ecu

kinglarry001

today i finally had time to sort a few bits out, so thought i would check the airbag. when i pulled the air bag out, wasnt even connected!!!! i swear i connect last time i removed it :silent: :oops:

thats probably why it wouldnt reset the codes. so will pop down there tomorrow and try resetiing them. fingers crossed