bazastra22sri said:
like gaz said 4 screws and 5 clips 3 under the car and 2 under the bonnet 😃
Not on a vectra it's not.
It's best done in this order...
3 screws to remove the top grill.
5 plastic push pin clips under the front of the bumber.
2 screws (one at either corner under the bumber near the wheel)
2 screws (one at either side just inside the wheel arch)
2 screws (behind the wheel arch liner - which needs to partly come off - these are a b@st@rd to get out)
Then once all these are done...
2 screws at the top of the bumber that were under the top grill.
Then it comes off 😃