cpwfos ive got a delocked handle all painted an ready to go in my problem is i dont have much patience and tried to remove the door panel i got as far as the 3 screws at the bottom and all the clips right the way round it was mostly off but had a look underneath and there seems to be a centre screw that i cant find the top of its like behind the inside handle so tried to pull the trim off to see if could find the screw but it wouldnt budge then before i broke summat i put it all back together and wrote this message 😃 anybody got any tips
cpwfos anybody know this coz im gunna have a go at work tonight and i can see myself just getting a hacksaw on that daft screw 🙂
sdbutler10 there are 3 at the bottom mate and also 3 or 4 in side the handle just pirse the case off and they are 304 screws in there quite hidden away mate just look and u will see tham. then the door card is heald on with push in clips then give it a yank.
cpwfos ah so the casing does clip off that in side handle does it is it a screwdriver job to prize i away
sdbutler10 yer it is mate a little flat blade one and its off. hope this helps 😃 also the top black rubber blade cant be a bit of a night mare to get back on as it have siver clips holding it on and they fall over but take your time and you will see what i am on about.
cpwfos nice one it seems to make sense after looking at it once ive got an 8 hour shift to play with it anyway :thumbup:
cpwfos i got it off but when i did i wished id never i didnt know where to start an quickly realised it was a weekend job. theres a big yellow piece of plastic on one side of handle with a nut and torque screw theres no room to work with what so ever and the window glass is totalt in the way aswell as for puttin the top of door sill back on whoever designed that is a goon :wtf:
Matt The yellow bit of plastic was faily easy to remove when I did mine mate. The hardest part was getting the handle and locking mechanism back in
cpwfos did you have to take the window glass out or any other bit and could you do it just through that hole you have to work with
Matt Sorry for the late reply. I did this all through the hole you have to work with, you just need to be patient, as it's an awkward fit