I can't remember if the vec C z22se has an electric pump or not, but if you do have an electric pump then simply bolt the blanking cover on instead :thumbup:
if you have a mechanical pump (it bolts to the end of the inlet cam) you can simply swap the inlet cam if the z22se engine doesn't have the hex drive, all vec B's do have the hex drive machined into the end of the inlet cam.
no matter what, <u>CHANGE THE CAM CHAIN KIT</u> on your new engine whilst it's out of the car cheers..
it's just a case of swapping the sump to match the car, some need the sensor, some don't. If you don't need the sensor simply cut the wire off. If you do need the sensor then you might have to swap the sump.