Stage one CompCams for sale.
I used these cams on my engine for less than 500 miles, but removed them due to the saga you can read about here viewtopic.php?f=87&t=10109&st=0&sk=t&sd=a
Please read the whole thread because I'm not so certain the wear / noise was caused by the cams and was probably an oil starvation problem or something peculiar to my engine. However, I'd understand anybodies reluctance to buy these cams from me given the experience I had, so I would be happy to offer a refund in the event the buyer has the same problem with the noise. ( See below for the conditions of this offer )
Some of the lobes and bearings are showing slight witness marks, but nothing excessive - probably a lot less than the cams you'll be replacing! I've measured them and in terms of base circle, lobe lift and bearing radius they are to spec - hence I no longer think they are defective.
This is the spec http://www.allecotec.com/product_info.p ... f059458d4b
I'm looking for £200 delivered within the UK mainland.
Refund offer
- Offer is limited to about four weeks from date of postage.
- No refund if your lifters go noisy or your engines done 100k and your chains on it's last legs - they were not the problems I had!
- I'll pay half of the return postage if the buyer returns the cams - a value based on whatever it costs me to send them in the first place.
Hopefully that's reasonable and won't put anyone off 🙂
Any questions drop me a PM
Scott.