so ive had the air box out to fit the vecy c pipe and thought i would do it a bit different lots of pics follow lol (i love pics)
1 so i removed the plastic pipe with cloth on it and thought that by putting the plastic back in it was defeating the objective see size diff in pic
2 so instead of putting it back in i thought i would fill the hole (some boat repair tricks here ) i needed to shanfer the edge to stop the filler being pulled in
3 so now some shiny plastic to stop the filler sticking and lots o tape to hold it in place while it sets
4 now for the filling bit i did not have any black filler so i made some just add black paint lol (it fiber filler to ) work it well in to the hole
5 and that's it leave it to set wet n dry the excess of the inside pull off the tape and shiny plastic and you are left with a bigger pipe with no hole to worry about
hope this helps
1 so i removed the plastic pipe with cloth on it and thought that by putting the plastic back in it was defeating the objective see size diff in pic
2 so instead of putting it back in i thought i would fill the hole (some boat repair tricks here ) i needed to shanfer the edge to stop the filler being pulled in
3 so now some shiny plastic to stop the filler sticking and lots o tape to hold it in place while it sets
4 now for the filling bit i did not have any black filler so i made some just add black paint lol (it fiber filler to ) work it well in to the hole
5 and that's it leave it to set wet n dry the excess of the inside pull off the tape and shiny plastic and you are left with a bigger pipe with no hole to worry about
hope this helps